|
|
|
We
bought your smart-screw here in Italy some weeks ago...do you remember?
Now, we tested your item and our impressions are good. To be honest,
in the beginning we thought that the screw head could have had the same
trouble typical of FCS screws, that is, stripping...then we tested it,
the metal is really good and the screw does it's job quite well....we
like the easiness and the speed to put it into place in the finbox.
Two turns and the job is done...really smart! We think this is particularly
useful for those longboarders using a 2+1 fin setup but also "singlefiners"
can appreciate it.
-Marco Matteucci |
|
Good
to go!
-woodyssurfin |
|
Quality
Products!
-wright277 |
|
Quick
shipping and well packaged!! A++++ seller!!!
-icecreamapricotbeauty |
|
|
|
Great
items, thanks again
-surfingwarren35 |
|
Ever
since I purchased my Walden, I wanted to change the screw and plate
for the center fin box. I didn't like the idea of a brass philips head
screw and a plastic plate with a brass insert. It was always in the
back of my mind.
I wish I could tell you about the first time I saw an ad for the smart
screw. I was surfing the WEB and I believe it was one of those ads in
the corner of a main page of some site. I clicked on it and went to
your home page. It was just what I was looking for so I ordered 2 on
the spot.
After I installed it, we had a run of wind blown chop that wasn't worth
the time. Then I said the he!! with it, I'm going out tomorrow. Guess
what, it was 4-6' swell, off shore winds and just great, especially
since most of the local kids still had school.
-Charlie |
|
great
seller.
-pashasurf |
|
All
good..excellent communication..thank you..A +++++++++++++++++
-jimbomoot |
|
|
|
I
first learned about smart-screw in Longboard Magazine. I saw the ad
and within 5 minutes I had gone to the website and ordered a few smart-screws.
A couple for myself and some for my friends. The screw is great, we
no longer have to worry about the flat head slipping and damaging boards.
NEXT YOU SHOULD HAVE A REPLACEMENT SCREW FOR LOK BOX FINS. It uses flathead
standard. I got this new custom 5'10" retro fish and it has a bad
a$$ set of twin fins they are 8.5" front to back and they drive
like he!!. I wish the box screw wasn't flathead. It's the only board
I have to carry a screw driver for.
Thanks for letting me give input.
Later, J.
-Jeremy |
|
I
saw it in the Longboard Magazine.
-Daron |
|
I
think I first saw it(the smart-screw) in an ad in one of the surf magazines,
and just
thought it was a great idea. I think the product is fantastic...
-Simon |
|
Excellent,
easy, fast, & exactly what I wanted, thanks!
- cjn1cjn1 |
|
|
|
I
saw the Smart Screw in your full-page Longboard Magazine ad. Since I'm
CONSTANTLY screwing around (pun unintended! I swear!) with fins, I thought,
"That's genius!" (OK, that pun was on purpose.) I like it
pretty well...
-Hugh |
|
Well
we first saw your ad in a magazine and we ordered, we don't charge extra
for them with our boards and we use them on models with 2+1 fin systems
because there is no sense in having to carry two kinds of tools for
your fins. When we sell a board with side fins that require an allenhead
set-up we throw in the screw with the center fin...
-Gil |
|
|
|
Just
what I was looking for. Quick, easy, high quality & as advertised!!
Thanks!
-dave_surfs70hj |
|
Thanks
a lot, works Great! Great Seller!
-scottysherin |
|
|
|
Yet
again, excellent service! Recommended A++++++++++++++++++++
-huw34 |
|
Received
product in a timely manner. Item arrived as described in listing, thanks!
-noahkauna |
|
|
|
Fast
response and shipping an A++++ EBAYer!
-romer759 |
|
Hurricane
just hit, lost power(6 days), screens, roof tiles, and a tree. But did
have some great waves. When the smart screws come
in, they will be used.
-Charlie |
|
|
|
Brilliant!
Cheers very much! Item received as described!
-tom_fewings |
|
Hey,
there I was out surfin' today at the Hook and I came in and one of your
company reps. came over and gave me one of the smart-screws. As soon
as my ride came, I grabbed my fin key and switched the screw and it
went on very easily. I am very impressed with your product and I will
tell all my friends about it, thanx.
-John Galli |
|
Great
Product, Fast Shipping, Excellent Service, AAA+++
-crazynuttydave |
|
|
|
Just
arrived this am, will be using this pm. Great idea and good value for
money. Loads of interest to see them from friends. Cheers!
-huw34 |
|
It
was received in perfect shape!! Thanxx
-splitmaster13 |
|
|
|
Perfect
Fit and Outstanding Quality,Totally Priceless When You Need One! Sea
Ya!
-surfing11365 |
|
The real reason the screwdriver got it's name is because you are screwed
if you forget one. Finally, a universal way to change out the fins
on all my surfboards. The smart-screw is the only way to go, and I
would definitely recommend it.
-Jeremy
(Worm) Salvatierra
|
|
Thanks
for the speedy delivery again. These are terrific.
-slosurf |
|
That's
great you're offering them at such a great price, what a steal at $1.99
/ smart-screw with plate!
-Mark Turner |
|
|
|
Genius
Industries and Smart-Screw have joined in sponsoring this year's ho'olaule'a.
What is a Smart-Screw, you ask? Well, surfing and surfboards have changed
since the early days of Duke's era when finless wooden boards were used.
Now most modern longboards come with three removable fins. A Smart-Screw
allows surfers to adjust their larger center fins with the same small
hex wrench tool commonly used to adjust the side fins. Most modern boardshorts
come with a hex tool inside the pocket.
-Outrigger Duke Kahanamoku Foundation |
|
Great
item. Fast shipping. So much easier to adjust fin in finbox with this!!!
-slosurf
|
|
Before the worker closed the best sandwich shop
in Hale'iwa, I snapped this shot. Smart-Screw made my trip to the islands
so simple. Thanks!
-Tom
Kelley |
|
|
|
On
a recent trip to Baja I saw your sticker on the Salsipuedes sign. Thought
you should know.
-Christian H. |
|
Fast
Delivery, Product as Described, the SMART-SCREW is the Best, Thanks
Genius!
-adkyler
|
|
I
like the smart-screw because I don't need a screwdriver! When I want
to change fins, I always have my FCS key. Less to take to the beach!
-Cindy Good |
|
|
|
I
checked out your screws on line and seriously, I could have used one
of them when I went to Hawaii last month! I had to use a butter knife
to tighten my screw since I forgot to bring my screwdriver!!!
-Alisa Burns |
|
Screwdrivers
are old-fashioned, smarten-up and use the smart-screw!
-Don C. |
|
|
|
Smart
people create smart things...
......... so simple yet so useful.........
...GREAT IDEA !!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-J. Howard |
|
Finally,
a center fin screw that uses the same tool as my side fins!
-Greg Hansen |